COGENERATION INSTALLATION WITH STIRLING ENGINE -COG 100

COGENERATION INSTALLATION WITH STIRLING ENGINE -COG 100

COGENERATION INSTALLATION WITH STIRLING ENGINE -COG 100

Teaching Experimental Applications (View Data Sheet (pdf))

  • Establishment of measuring instruments.
  • Commissioning and testing of good operation.
  • Parameters control.
  • Adjustment of regulations and safety devices.
  • Control of the combustion.
  • Preventive and curative maintenance.
  • Mapping of electrical and hydraulic diagrams.
  • Study of yields

Technical Details (View Specification (docx))

Potentiometer simulating the outside temperature of +20 °C to -20 °C with aluminum knurl for temperature variation

Boiler gas condensing cogeneration modulating power of 3.5 to 26.2 kW (15 to 100%) which 5 kilowatts maximum provided by the Stirling engine, electric power maximum engine output of 1000 watts, output smoke flue 60/100 mm.

Power supply module with breadboard (separate power supply 220 volt).

Mixer with spout of 200 mm mounted with square stainless steel sink recessed.

Flowmeter 0-1600 l / h with needle valve and connection ½ stainless steel.

Reversing valve heating or DHW controlled by probe connection in 3/4

Round thermometer 0-120 ° with needle.

DHW cylinder with 130 liters of a heat exchanger with an exchanged power of 22.6 kW with connection diameter 3/4.

Backflow preventer connection 3/4

Isolated module regulated circuit equipped with a latest generation circulator, thermometer valve on the flow and return, check valve, three-way valve and servomotor supplied with 230 volts via the specific power supply box.

Dimensions (LxDxH mm) : 2500 x 800 x 2200

Weight (in Kg) in water: 500

Fumes diameter  60/100 mm

Documentations

  • User Manual
  • Technical documentation of the components
  • Lab exercises
  • Certificate of conformity CE

You may also like...